Model: WTR-G02

Brief Description:
1. Wireless receiver can be connect to different navigators
2. Wireless transmitter can be connect to different cameras
3. No wire between the wireless transmitter and wireless receiver
4. Effective distance between the transmitter and receiver is 80 meters.
5.Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation)

Features:
1.100% brand new,High quality
2.Easy installation
3.Take one minute get your camera become a wireless camera
4.Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation)
5.Work Range:Up to about 50m(Hollowness)
6.Connects to rear-view camera and front video screen
7.Fit all RCA composite video connections
8.Power: DC 12V
9.Transmitter/Receiver Cable Length:1.5m
10.*Fit all RCA composite video connections

Package Includes:
1x 2.4Ghz Transmitter
1x 2.4Ghz Receiver
Packaging Details
Package Weight:0.25kg (0.551lb.)
Package Size:10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)

Installation Guide:

1. Convert any reversing camera with a standard phono/RCA connector into a wireless camera with this universal transmitter and receiver kit.


2.Eliminates the need to run a cable the length of the vehicle, just connect the transmitter at the camera end and the receiver at the monitor end.
The transmitter also includes a handy pass through for the power so you can connect it inline with your camera.

3. Wireless transmitter with male phono plug and male 3.5mm power plug for supplying power to the camera. Wireless receiver with male phono plug for connection to monitor.

4. How to Install a Camera with the Wireless Module:
=> Take out your stock license plate light at the back of your car.
=> Fix the camera to where the stock license plate light was.
=> Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
=> Connect the wireless module (transmitter) to your camera via the two cables - yellow plug for AV output and black plug for power
=> Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative
=> Connect the wireless module (receiver) to your car monitor - yellow plug for AV input.
=> Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative
=> You will see the images when your car is in reverse shift.